The content of the article:
- Rolling jacks
- Bottle jacks
- Screw (rhombic) jacks
- Rack jacks
The jack is one of the attributes that every car owner should have. A reliable and high-quality device is indispensable, not only when performing certain types of repair work, but also when replacing a wheel. Rack, rhombic, rolling and bottle lifts can be used to lift the vehicle off the ground.
The products of hundreds of manufacturers are presented on the Russian market, in the assortment of which there are several varieties of jack models at once, which significantly complicates the choice. Therefore, we decided to prepare a small rating of the best jacks in 2019 for each of the subspecies.
Rolling jacks
Photo: jack WIEDERKRAFT WDK-81885
Lifts of this type, due to their ergonomics and ease of use, are very popular among car owners. Among the best models of rolling-type jacks are:
- Widercraft WDK-81885 - used in the repair of passenger cars and small trucks weighing less than 3 tons. Due to the comfortable long handle, it is easy to raise the vehicle to the required height, and the presence of steel wheels makes it easy to move and roll the lift under the car body. It can be used to raise the machine to a height of 85 to 455 mm.
Special attention should be paid to the presence of pre-installed security systems that prevent a sudden fall of the car. Such a jack will be an excellent choice not only for a private garage, but also for a small car repair shop or tire fitting.
- AUTOPROFI DP-20K is a small Chinese lift that impresses with its cost and level of equipment. A special case is included with the device, which provides more convenient storage and transportation of the jack.
Feedback from the owners testifies to the good quality and reliability of the lift, but the maximum height to which the car can be lifted somewhat pumped up - only 330 mm. This unit can be operated with machines weighing up to 2 tons.
- Matrix 51040 - this model is very popular due to its low cost and high enough reliability. Moreover, the situation with him is not spoiled even by the fact that he is equipped with one, not two working cylinders.
The working range of the jack ranges from 150-530 mm, which allows the device to be used with both passenger cars and off-road vehicles, the weight of which is no more than 3 tons.
Bottle jacks
Photo: Stayer Red Force jacks
Devices of this type have good stability and withstand impressive loads, but they are quite demanding on maintenance. Among the best bottle jacks are:
- STAYER Red Force 43160-12_z01 is a device that allows you to work not only with passenger cars, but also with trucks weighing up to 12 tons. At the same time, the jack has a small mass and not too bulky dimensions, and this is despite the fact that it is made of strong grades of steel. The working height range is 230-465 mm, which should be taken into account when choosing it.
- ОМBRA OHT 108 is a small 5-kg jack that allows you to raise a car to a height of 405 mm, provided that its total weight does not exceed 8 tons.
True, due to its low weight, it is difficult to fix the load with its help, therefore, having raised the car even to a small height, it is recommended to install safety supports. Numerous reviews about this lift highlight its reliability and ease of maintenance.
- Airline AJ-TB-04 - the lift of this model has an optimal lifting capacity (up to 4 tons) and an excellent working range of lifting - from 229 to 535 mm. Separately, it is worth highlighting the presence of a non-slip notch on the saddle, a valve that protects against overload and a special retractable screw.
For ease of transportation, the manufacturer has provided for the presence of a special bag and the ability to work at temperatures up to -40 degrees.
Screw (rhombic) jacks
In the photo: jack KRAFT KT 850000
This is the most common type of jacks among car owners due to their low price, compactness and low weight. Highest quality models:
- KRAFT KT 850000 is a compact jack with an electric drive capable of being powered both from the vehicle's on-board network and directly from the battery.
Also, the manufacturer has provided for the presence of a handle for mechanical lifting of vehicles. It can be used to service vehicles weighing less than 2 tons.
Among the additional "chips" are the presence of a special plastic case for transportation and the ability to work at temperatures up to -45 degrees.
- Airline AJ-R-02 is one of the most affordable and demanded rhombic type lifts, which is also produced in Russia. There are rather contradictory reviews on the network, where some car owners characterize it as an inexpensive, compact and reliable device, and the second complain about a large number of defects in detail.
But if we talk about serviceable models without marriage, then it turns out that this is really one of the best jacks in its price category, allowing you to work with cars with a low ground clearance (from 95 mm).
- AUTOPROFI DV-15R is a Chinese-made jack with high reliability, but it has some ergonomic errors. The pickup height ranges from 100-390 mm, and the maximum allowable weight of a car for lifting should not exceed 1.5 tons. Also, one cannot fail to note the low weight and compact dimensions of the device.
Rack jacks
In the photo: jack Inforce 08-08-03
The main difference between rack and pinion hoists from all previously presented ones is a large lifting height, due to which they are most often used at service stations. Among the most successful models are:
- Inforce 08-08-03 is a professional type jack made of durable steel with anti-corrosion coating, which ensures a long service life. The device boasts a comfortable handle and a large base area, making it easy to lift a car weighing up to 5 tons.
- MATRIX 505155 is the optimal device in terms of cost, workmanship, technical capabilities and durability. With its help, you can work with machines weighing up to 3 tons. The minimum lifting height is 153 mm and the maximum lifting height is 700 mm.
- Skyway S01803005 is a reliable and easy-to-use jack that provides high smoothness of lifting and lowering of vehicles weighing up to 3.5 tons. A distinctive feature of the device is a special loop located on the carrier rail, due to which the jack can be used as a winch.
Also, the owners of SKYWAY S01803005 note the reliable fixation of the vehicle and a high level of safety.
Conclusion
It is necessary to select a jack based on your real needs and the specifics of operation. So, if you need a small lift that would always be in the car, look in the direction of screw or bottle jacks, but if you need a more efficient and "stationary" device, your choice is roll-up or rack-and-pinion lifts.
